08-28-2024 11:26 AM - last edited on 08-28-2024 01:13 PM by James_C
Hi All,
I am printing art prints of my illustrations. Unexpectedly, my pro-200 has just started to be quite faint, especially with the black, when printing the first couple of inches of a print. It then get darker and prints the correct colours for the rest of the print, though sometimes it will get faint again toward the end, especially on text..
Some photos attached.
I haven't changed any settings, ink cartridges, or paper immediately prior to this happening. I have since replaced the black ink cartridge which seemed to solve it for one small 8x10" print, but then the next one went straight back to the same issue.
I did a nozzle check and cleaned the print heads.
Does anyone have any other suggestions? Thank you
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.