cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Moving my Pro1000

JWOPHOTO93
Apprentice

Hello All, 

I need to move my printer from the downstairs dining room, that was once the makeshift office for my printing to one of the spare bedrooms upstairs that is now the dedicated office space for my work.  (Kids are gone, I am empty nesting!  HA!)     Do I still need to do the moving process of dumping my ink, etc., or is it OK to move it as carefully as possible?     Once it's upstairs, should I do another maintenance run as well?

Thanks in advance,

Jules

 

2 REPLIES 2

Will55
Contributor

When you move the Pro 1000, be very careful not to let printer tilt more than 20 degrees (or isn't 15 degrees?) . This will require your helpers know not to -even for a second- to tilt the printer. Once in place, run a nozzle check or test print. Check ink level to make sure there was not an ink dump. Check your ink level before and after moving to see the levels are the same.. when you unplug printer and then re-plug it in and turn it on, it will automatically do a purge/maintaince cycle.  

Thank you!!

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.