04-13-2022 08:21 AM
Hi,on my new MS Server 2019 I setup the IR C5235i printer with PCL6 driver and OVERLAY enabled pointing to a model like
"model.pxl" in folder "\\server\data\models\"
When I distribute via GPO the printer these options are ignored,
so the CLIENT-PCs has the OVERLAY option empty.
My driver version is quite old (but never had problem in the past) so I'm not sure what to do,maybe you can help me?
Thank you!
04-13-2022 08:30 AM
Hi, Radames!
Thanks for posting! While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.
If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.
We hope this helps!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.