12-10-2022 08:56 PM
I have purchased a 19 mill 450 gsm textured canvas to print for artwork to put on a canvas frame.
I just assembled my Pro - 4100 printer a month ago. I am new to this printer.
Does the Artificial Intelligence in this printer know not to use the automatic cutter for this material? because I assume the cutter on the Pro-4100 cannot cut this thick of medium? I looked at the manual and cannot tell the max gsm this printer can cut.
Appreciate any advice.TIA
12-14-2022 09:15 PM
I am replying to my own message hoping canon tech support could answer the simple question above.
12-15-2022 08:37 AM
Since the printer's specifications do not appear to contain this information, I would recommend contacting Canon Support.
Canon Support for | Canon U.S.A., Inc.
If you register your product, you can access all of the support resources for your device.
Bay Area - CA
~R5 C (18.104.22.168) ~RF Trinity, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10~6D2 (v1.1.1) Retired ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.