12-10-2022 08:56 PM
I have purchased a 19 mill 450 gsm textured canvas to print for artwork to put on a canvas frame.
I just assembled my Pro - 4100 printer a month ago. I am new to this printer.
Does the Artificial Intelligence in this printer know not to use the automatic cutter for this material? because I assume the cutter on the Pro-4100 cannot cut this thick of medium? I looked at the manual and cannot tell the max gsm this printer can cut.
Appreciate any advice.TIA
12-14-2022 09:15 PM
I am replying to my own message hoping canon tech support could answer the simple question above.
12-15-2022 08:37 AM
Greetings,
Since the printer's specifications do not appear to contain this information, I would recommend contacting Canon Support.
Canon Support for | Canon U.S.A., Inc.
If you register your product, you can access all of the support resources for your device.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.