cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

imagePROGRAF PRO-300 driver issues with MacOS 15 Sequoia on M1 Mac

cape_ed
Contributor

I’ve been using my Pro-300 on my M1 iMac (OS14 Sonoma) for over a year with no problems. I just updated to OS15 Sequoia, and when I install the driver (via the online setup) it keeps installing the AirPrint version of the driver. There was a procedure to get around with Sonoma, but it’s not working with Sequoia. I checked the Pro-300 Firmware, and it's 2.0, the latest.

Has anyone been able to run the Pro-300 on an Apple Silicon Mac with Sequoia, and if so how do you get around the AirPrint issue?

Ed

1 ACCEPTED SOLUTION

Stephen
Moderator
Moderator

You can get the most up-to-date software from https://canon.us/setup or from within your My Canon Account at https://canon.us/account 
If you need one-on-one help, give our team a call at 800-OK-CANON.

View solution in original post

25 REPLIES 25

patnotz
Contributor

I have a PRO-1000 and my M1 Mac Studio wasn't able to print after updating to macos 15 / Sequoia. I tried uninstalling everything and reinstalling the drivers but the driver installation crashes during the "Add Printer" step. If I instead use the built-in driver I can add the printer but the Canon software doesn't recognize the printer. 

It's not the same problem you're seeing but there does appear to be an issue with macos 15. 

Thanks Pat. I thought I checked all my software compatibility before updating to 15, but I forgot about the Pro-300. I will contact Canon Support. If the new driver is not ready yet, maybe there is a workaround. I will post back my findings.

Ed

balingtwine
Apprentice

Yes, but with difficulty. I only received my new pro 300 printer today and I could not understand why it was installing the Airprint driver.  I finally connected the printer via USB, downloaded the printer driver and installed the driver.  Funnily, I deliberately avoided the CUPS driver version, but in the end this is the one that appeared.  I then proceeded to remove the Airprint driver, restarted the Macbook.

Nevertheless, it was all a bit of a waste of time as the driver does not work correctly when printing from Capture One.  It does work when using Canon's print layout software. 

All very annoying.  I wish Canon would advise users. 

JVNPhoto
Apprentice

Same problem I believe. I just purchased the new PRO-1100 and I run into the same problem on macOS Sequoia. When I try installing the driver, the process just crashes and shows me an error message produced by CIJAutoSetupTool2S. I haven't found a solution, nor do I know how/where to talk to any kind of tech support.Screenshot 2024-09-27 at 13.50.45.png

I submitted a customer service ticket with all the details. Fingers crossed. I’ll report back anything I find out. 

Where can you do that? Could make sense if we all log tickets to signify it's a bigger issue.

patnotz
Contributor

My products are all registered through Canon Canada and I just sent them an email through the link on this page:

https://canoncanada.custhelp.com/app/contact

This is the same site where I can see all my registered products (lenses, etc.). If you're in another country there's probably something similar. The automated email I received after sending has an incident number which gives me hope that there's some internal tracking system. 

JVNPhoto
Apprentice

I did a few more tests and managed to get it working via a good old USB cable. The problem seems to be related to installing the driver when the printer is network connected. Whether it is wireless or wired does not seem to matter, it fails on both attempts.

patnotz
Contributor

Oh that's great. I wanted to test that but my printer is in a different room. I just need a 20' cable 😫

I'll send a link to this thread to my incident email.

Avatar
Announcements