01-18-2015 12:05 PM
Trying to set up a Canon Pixma MG3500 and the setup software cannot detect the printer on the network. Any ideas what to try?
01-18-2015 06:49 PM
Is the wifi light flashing blue?
01-19-2015 04:23 AM
It's on and blue, but not flashing, no.
Thanks for your help.
01-24-2015 07:16 PM
Try holding down the wifi button until you see the orange light to the left flash twice, and then let go. The wifi indicator should be flashing blue after this. Attempt the installation while this LED is flashing.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.