cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Unable to Connect to Wireless Access Point

tommybstring
Apprentice

I'm trying to get this Canon Printer (PIXMA TR8520) connected to my wireless network. I have reset all the settings to default on the printer. When setting up the printer on the network I selected 'wireless LAN' and  'setup manually'. Then I select my access point, but when I type in the password I get the message "failed to connect to the wireless router"

 

I know the password I've entered is correct and verified. Any hardware issues why I cannot simply connect to my home wireless network? My laptop is on the network, so I know its working. I have also rebooted the modem and router.

 

Anything else I can try? Should I return the printer? I don't have a printer usb-b cable and want it setup on the network.

 

Thanks for any help! 

 

 

1 REPLY 1

Caemene
Rising Star

Hi tommybstring,

 

I understand that you have a TR8520 and during the Manual Connect it is not accepting your network password. 

 

To troubleshoot this issue, perform the following steps to check the printer's network card:

 

  1. Press the WI-FI icon.
  2. Press YES if a password message appears.
  3. Press LAN SETTINGS.
  4. Press WIRELESS DIRECT ACTIVE/INACTIVE.
  5. The message, You can connect the printer and wireless devices directly without involving a wireless router. Press ON.
  6. The message, Password information is included in the next screen. Press YES.
  7. Note the SSID and the PASSWORD, press OK.(You may need to slide your finger from the bottom of the screen to the top to obtain all the informaiton.)
  8. Connect a mobile device to the printers SSID via wireless LAN, perform a test print.

Once the test print is performed successfully. Attempt connecting the printer to your network (password is case sensitive).

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.