02-20-2019 05:19 PM
I'm sure this has been addressed earlier, but I can't seem to find it.
I have a friend with a Pixma MX922 which I understand only connects at 2.4g. She cannot print or scan when she is connected to her router at 5g. She keeps having to switch her laptop down to 2.4 whenever she wants to do that. Her laptop is a Dell running Windows 10, but her husband has a Macbook and has no problems with this.
Any ideas/suggestions, etc? If any specific information is needed, please let me know and I'll be glad to supply it. Thank you in advance.
02-20-2019 05:48 PM
Greetings,
This is a hardware or network issue unrelated to the Canon printer. Although the printer connects to her network on the 2.4Ghz broadcast, all network devices regardless of how they connect wired or wirelessly, irrespective of band can print to the network printer if properly configured.
I would look at the network configuration or router. Wireless isolation, using vLANs, cascading devices, etc. Have no idea about her individual set up, but this is not a limitation of the printer.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
02-20-2019 06:09 PM
Hi Rick,
Thanks for your response. I didn't mean to imply that this was a lmiitation of the printer. I figured it was config. issue, but thought perhaps they might be some standard "across-the-board" settings that someone here could supply. I guess I'll have to contact the ISP. Thank you.
Regards,
--- Gary
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.