09-10-2013 11:04 PM
I just purchased a Pixma Pro-100 and installed it as both a wired and wireless printer on my Macbook Pro (2012) (OS 10.8). I just noticed that the wireless print dialog in the printer system preferences is quite different from that of the wired printer. In fact the wired printer has a driver version of 10.72.1.0, while the wireless printer has a driver version 1.0. Is this due to less functionality as a wireless printer? Or did I mess up the installation?
09-16-2013 08:56 AM
You're probably noticing the difference between drivers supplied or updated by Apple (the wired version) and those provided by Canon (included with your installation).
The good news is that while things may appear different, you will have all the same functionality with both setups.
If you want to ensure that you have the most up to date drivers, visit our website. Of course, if you have any other questions, please feel free to Contact Us!
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.