02-19-2020 08:11 PM
Hi, have an older Pixma MP495, using wireless on secure network no problem but I want to disable Bonjour. I printed the network configuration page and it is apparently enabled by default. There is no place to change it in the IJ Network Tool. Any ideas? Thanks.
Solved! Go to Solution.
02-20-2020 03:48 PM
Hello.
Access the RemoteUI page for the printer by entering the IP address of the unit in the address bar of your web browser. To determine the IP address of the printer, perform the following:
1. Press the 'Maintenance' button on the printer repeatedly until 'n' appears on the LED display.
2. Press the Black Start button.
3. A sheet will print displaying the network information.
Once there, you should be able to disable the Bonjour setting.
02-20-2020 03:48 PM
Hello.
Access the RemoteUI page for the printer by entering the IP address of the unit in the address bar of your web browser. To determine the IP address of the printer, perform the following:
1. Press the 'Maintenance' button on the printer repeatedly until 'n' appears on the LED display.
2. Press the Black Start button.
3. A sheet will print displaying the network information.
Once there, you should be able to disable the Bonjour setting.
02-20-2020 10:46 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.