cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA TS3522 Wi-Fi Issue & Error Code E36

AZPrinter
Apprentice

I've had my printer for about a year and now I'mhaving some issues. I followed the guide to get the printer connected to WIFI even though it was never removed, and I'm getting the e36 error code. I connect the printer to the Canon wifi, then connect the print app to my wifi and the code appears. Very frustrating, but any tips on how to just get this thing to print?

2 REPLIES 2

Greetings,

e36 is Easy Wireless Connect has failed.

You also mention "I connect the printer to Canon Wifi".... Does this mean you have named the wireless network in your home "Canon Wifi"? or maybe you are referring to the printer's broadcast which it cannot connect itself to.

Here's what I recommend.

Connect the printer to your wireless network. This will be a 2.4Ghz broadcast from your router. Once the printer is connected to that, any device on that network, a computer, mobile device, etc, will be able to print to it.

Visit this site:

Canon Support for PIXMA TS3522 | Canon U.S.A., Inc.

Press the Set Up tile, then expand the section on Wireless Set up. You can choose the method that applies to your situation,

Note:

The printer also supports wireless direct printing. This makes it possible to print directly to the printer from a computer or mobile device without a router or wireless network. While this is handy, its not very practical as the printer can only be used by one device at a time, which it has to be associated or connected to. This means you would have to individually connect or associate a device with the printer each and every time you want to print.

Connecting the printer to a wireless router is preferred since this allows any device to print without constantly changing connections. To connect the printer, you will need to know the SSID or broadcast name of your 2.4Ghz wireless network. You will also need the wireless password.

Once connected, you can connect your mobile device to the same network. Now the phone can print as well.

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Wcasey2013
Apprentice

I have the same problem but I have 5g Wi-Fi 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.