01-29-2024
09:42 AM
- last edited on
01-30-2024
10:11 AM
by
Danny
02-06-2024 01:26 PM
02-20-2024 12:42 PM
Thanks, Arthur. I will do that on my iPhone. But please tell me what to do with it. Thanks again.
02-20-2024 12:59 PM
Never mind my previous reply. I see the instructions.
02-24-2024 02:06 PM
I already had the app CannonPRINT on my iPhone. I used it a couple years ago when I first set up the printer. So I cannot follow these directions. The app does not show what the directions says it should show.
I know I need to change the wifi password but cannot find in this app anyplace to do that.
02-20-2024 01:11 PM
Greetings,
Your printer is not aware you got a new router, and it will continue to use the password used previously to connect to the wireless network. You will need to update the password so the printer can connect and communicate with the new network.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
02-21-2024 08:37 AM
OK, Rick. Should I do that with the app that Arthur told me to download to my iPhone?
02-24-2024 02:09 PM
I cannot find the place where I can change the password.
02-24-2024 03:00 PM - edited 02-24-2024 03:02 PM
Greetings,
If you are using the App for iOS or Android, you have to put the printer into cableless set up mode (first) before starting the detection and connection process in the App. You are not given the option to enter a password after selecting the network (SSID) unless done first.
If you continue to have difficulty, let me know and I will provide another option.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
02-26-2024 11:01 AM
Thanks for your help, Rick. I DID first put my printer into cableless setup mode. The problem is, I think, I already had Cannon Print app on my iPhone. I downloaded it the first time I set up the printer. Now it does not look like the directions say it does, and I see no way to set up the printer with the app anymore.
The app opens to a home page with buttons for DOCUMENT PRINT, PHOTO PRINT, SCAN, SMARTPHONE COPY, CLOUD, COPY, CREATE PHOTO ITEMS, and FAQ. I can switch pages to Function or Add/Switch. There is a menu with About, Notification Settings, Notices, and Delete Account.
Add/Switch sounds like it might pertain to my situation. It lists my printer. When I tap that, nothing.
I see no place to set up the printer probably because it thinks I already did. I don't know why Canon provides no place to change my password.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.