cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

IX6820 WIN 10 Pro - how to disconnect wireless

mjhampstead
Apprentice

Hi

IX6820 - WIN 10 Pro - how to disconnect wireless

 

There is nothing in the manual re how to disconnect wirelessl  Pressing the WiFi blue icon does not do that.

The printer is not accepting file to be printed from my computer so I would like to connect the two via a usb cable.

Thanks

2 REPLIES 2

BillS
Mentor

Hi mjhampstead,

 

You can change the connection type by re-installing the printer driver.

 

  1. Disconnect the USB cable until prompted.
  2. Click HERE.

  3. Scroll down to "Optional Drivers."

  4. Click “Select” next to "iX6800 series MP Driver."

  5. Press "Download."

  6. Open and run the file.

  7. Follow the onscreen instructions to complete the installation.

This didn't answer your question or issue? Please contact us at one of the methods on the Contact Us page for further assistance.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

jodido2020
Apprentice

didn't work, installation went fine, followed software prompts for changing connection but wifi still connected.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.