06-07-2013 07:20 PM
My printer was working but then was turned off. Now I can't get it to print mode. How do I get it out of copy, scan and fax and back to print?
08-13-2017 06:54 PM
Where does the USB cord go into the MX432 Canon Printer
08-13-2017 07:48 PM
Hi JoyceKiefer!
We'd be happy to help you with locating the USB port on your PIXMA MX432! The USB port is on the back of the printer to the right of the power cord. We've highlighted the port below in yellow. You will need a USB A to B cord.
We hope this helps!
01-04-2018 10:59 PM
Hello I did all of that but it still won't connect. It will print if hooked up to the cord, but it was printing without it before and I would like to get back to that wireless printing; help me.
05-02-2018 07:25 AM
Hi casanchez24,
Were you able to print with your PIXMA MX430? If not, please contact our support group using the following link:
http://Canon.us/ContactLI
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.