03-25-2024 09:57 AM
Hi there, I recently purchase a canon TS3150 printer and cannot get it to connect to our wifi. I think this might be because we have wifi boosters in our house as we have poor signal in certain rooms. Any ideas as to how I can get it to connect?
03-25-2024 11:18 AM
Greetings,
This printer has a 2.4Ghz radio and can only connect to a wireless broadcast using 2.4Ghz and WPA2 / AES Encryption.
If you are using boosters which are not wired to one another, check to see what band the backhaul is using.
You wireless must be broadcasting a 2.4Ghz signal in order for the printer to connect to the network.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
03-25-2024 11:49 AM
Thanks! I shall give it a go. Will report back
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.