cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon TS9000 Printer _ How do i update WIFI information

wbren0960
Apprentice

HAd to change my wifi and the printer still shows the last address so it can not connect to the computer -- how do I delete and update the WIFI address

1 REPLY 1

Mike
Moderator
Moderator

Your PIXMA TS9020 can connect wirelessly to a network by manually entering in your network information.  Follow the steps below to connect the printer to your network via the Manual connect method.

  1. From the HOME screen, tap the Settings icon.


     
  2. Tap Settings.


     
  3. Tap Device settings.


     
  4. Tap LAN settings.


     
  5. Tap Wireless LAN.


     
  6. Tap Wireless LAN setup.


     
  7. Tap Manual connect.


     
  8. The printer will search for nearby wireless networks.



    A list of wireless networks will appear.  Swipe up or down to locate your network if it is not selected by default.  Tap on your network.



    Note: If your network does not appear in the list, tap Search again.  This will make the printer search again for nearby wireless networks.
     
  9. If your wireless network has a passphrase on it, the Enter passphrase will appear.  Tap the boxes in the middle of the screen.


     
  10. A keyboard will appear on the screen.  Tap on the characters as needed to enter your network passphrase.



    By default, lowercase letters will be displayed.  If you have uppercase letters in your passphrase, tap the shift  icon.  Uppercase letters will appear on the screen.



    If you have symbols in your passphrase, tap the symbol at the lower left  corner of the screen.  Symbols will appear.



    If you are selecting symbols and you tap the shift  icon , more symbols will appear.



    If you need to delete a character, tap the backspace  icon.  If you have a space in your passphrase, tap the space bar .

    After entering your passphrase, tap OK..
     
  11. You will be taken back to the Enter passphrase screen.



    Tap OK.
     
  12. The printer will attempt to connect to the wireless router.



    Tap OK.


If the printer fails to connect to the wireless router, re-enter your passphrase and try again.

After the printer has connected to the network, set up your computer or mobile device if needed.

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.