09-15-2013 06:40 PM
I don't know what I am doing wrong. Followed the directions on set up. It was great the first day and then offline. I always have to reconnect to our wireless network and that is only hit and miss. I don't know what I am missing, but I am desperate....3 kids in school always needing to print....... this is too much stress! Please help!!
09-15-2013 10:08 PM
If this is a time-sensitive matter, we would suggesting reaching our technical support team through the following link: Contact Us.
11-02-2013 12:14 AM
I'm having the same problem using two Windows 8.1 machines and one Windows 7. Sometimes it prints, mostly it goes offline. Have tried power cycling, reinstalling the drivers, trying to use printer offline. No magic fixes. Really super frustrating for a new printer.
01-18-2018 07:03 PM
I am on Windows 10 and working wireless
11-09-2013 03:44 PM
My new cannon MX-920 will not stay on line. my two windows 7 computers work ok when I enable popups. which i'refer not to do. If I knew what popup to allow it would be ok.
mywindows 8.1 always thinks the printer is in standby. even rhough the other computers are on line. . power cycling the pronter always puts the printer back online. How do i fix this?
wireless network computers win 7 HP Acer. win8.1 surface pro access point Belkin
11-16-2013 09:48 AM
Please contact our technical support group for assistance with these issues. Please use the link below to contact our support group.
12-12-2013 09:27 PM
so...this sucks...I have the same problem window 7. Never ever had such issues. I'm tech savy, electronic engineer and work with computers all the time. Why doens't Canon publish problem statement and corrective action?
12-21-2013 08:17 AM
10-13-2016 09:36 AM
Try and look at the IP address the printer asigns itself and if that is not in the range that your router (access point) is set for it won't connect. I have an MX920 and had the same issues for a long time. I was ready to scrap the printer. On reflection it seems the self assigned IP address drifted over the years of powering up and down that it was out of range of the various routers i have owned. Try doing the big factory reset through the menu/setup/device settings/ reset. This should bring it back to settings close to when you unpacked it and it worked and you thought you loved this new printer, it was so easy to connect. Also check your IP address start and end range found in the DHCP Server. To do this you'll need the IP numbers of your router which are usually printed on the router with model and serial numbers. Type this in the address bar of your internet browers and login in. Admin login username and password is also usually written on the router base.
Hope this helps
02-25-2017 04:28 PM
how do you find IP addresses?
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.