11-07-2024 07:04 PM - edited 11-07-2024 07:07 PM
I moved and now my Canon Maxify 2120 printer is operating on the old wifi password and it won't connect to my new wifi system in my apartment. I don't see any place at all either in my computer or on the printer to type in the new password for the wifi so that the printer will connect to the network and work on wifi again.
Can someone tell me how to get the printer connected to the wifi using the new password? How do I tell the printer what my new password is for the wifi system in this new apartment? I am using a Macbook Pro with Sonoma 14.6.1.
Thank you,
donna
11-09-2024 04:11 PM
I have the same problem, had to replace the router and now it doesn’t ask for password. Have you figured it out?
11-09-2024 05:09 PM
No I just gave up and attached a cable I'm so disgusted with the whole thing. At least it prints but now wifi doesn't work at all have to use a usb cable and that is extremely inconvenient. sucks!
11-28-2024 09:44 PM
All of the above. Except now I'm giving it another try with the same results. iOS and MacOS, I've configured routers to have a reserved IP address, I've entered IPv4 and 6 addresses exactly. I've used "other" network to manually enter the Wifi password. I will not resort to the cable again; it must print over Wifi.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.