04-08-2019 09:05 AM
04-08-2019 10:14 AM
Can't comment on the feed issue. The printer won't damage itself if it encounters a jam. Forcecibly removing a jam is a different story.
Blurry printing. Try a print head alignment
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
04-15-2019 03:17 PM
HI Junek,
I recommend performing a roller cleaning. Please click HERE for the steps.
If the print alignment does not solve your blurry printing, the issue is most likely caused by splattered ink or smeared grease on the printer's encoder film after the paper jam.
In order to resolve this issue, please clean the encoder film. It is a clear plastic strip inside the printer that is responsible for aligning the prints. Please use cotton swabs moistened with alcohol or glass cleaner (better). Clean the film several times, even if it appears clean. For complete instructions, click HERE.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.