08-19-2021 09:53 AM - last edited on 08-19-2021 10:01 AM by Danny
After cleaning print head via printer.. The printing was okay. Deep cleaned via printer one more time. The next day I tried to print again and received code 1410. Replaced with new Y and PGBK cartridges. Changed nothing. Still shows code 1410.
Any suggestions besides a new printer for my Pixma MG6320?
10-20-2021 03:17 PM
Hi BuckyZ,
The 1410 error is an indication that your PIXMA MG6320 does not detect one or more of the ink tanks installed.
Please make sure that your PIXMA MG6320 has all of the ink tanks installed and that none of them have any tape or cellophane on them.
Also, please make sure you are using compatible ink:
CLI-251BK Black
CLI-251GY Gray
CLI-251Y Yellow
PGI-250PGBK Black
CLI-251C Cyan
CLI-251M Magenta
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.