05-26-2014 12:00 AM
05-26-2014 04:39 AM
05-26-2014 04:39 AM
03-20-2015 10:20 AM
I had the same problem my SX160, now out of warranty and never dropped or abused. The lens locked up and "lens error" came on the screen. I tried all the fixes but nothing worked. No one mentioned the recording (movie) button, so as a last resort I turned on the camera and quickly pushed it. Bingo, the screen came alive and the lens started working normally again. This seems to be a common problem with this camera but if it happens to you try this fix and let me know if it works. Thanks. ellbarb4255
05-26-2014 10:52 AM - last edited on 05-26-2014 11:30 AM by Crista
Yes lens problems are the most difficult to repair first contact Canon and weigh the cost of repairs over the value of the camera. To do repair it properly yourself is or could be difficult. Once the lens is replaced, or parts are replaced it requires thousands of dollars in software and special image tools to get the lens back into calibration. Having said that I am an adenturous type myself, I regret it sometimes, so I would search out a service manual and at least take it apart and look for something simple that may be wrong. Of course it is a risk and depends on your skill level. New ones are going for about $120 on auction sites right now. [MOD NOTE: Link Removed per FORUM GUIDELINES]
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.