05-04-2013
09:16 AM
- last edited on
05-04-2013
10:11 AM
by
Stephen
in shooting mode on the sx280 it shows a full battery - when i go into movie mode the battery flasshes red - why is this - please assist. [Mod note - removed email address (for your safety) - please see FORUM GUIDELINES]. canon sx280. thanks.
05-10-2013 07:50 PM
When I called technical support I told her to just open an sx280 and try to shoot a movie and she'd know what we were all talking about. She told me they had a sx280 there which they used and it did not have this issue.
05-10-2013 08:53 PM
Yeah, that's the 'script' I guess. Same response for everyone who calls. It's a HUGE company so I highly doubt anyone we talk to on the phone has their hands on one. We are dealing with customer service employees, not technicians. Anxiously awaiting a resolution from Canon... return window is getting smaller each day.
05-07-2013 10:47 PM
I have the same issue, and this is being discussed in another thread on this forum too.
Just now, movie mode was working fine, UNTIL I used the zoom. Then the battery icon began flashing. As before, I exited movie mode, turned the camera off and then on again, and the battery icon was normal.
05-10-2013 06:06 PM
Hi everyone, we are listening and will provide an update as soon as information becomes available.
Thanks for your feedback and participation in our forum.
05-10-2013 09:06 PM
I'm having the same problem. Just took the camera back to Best Buy and they exchanged it. New camera at home - same exact prblem. Help Canon. Graduation this weekend and I bought three batteries to get me through the afternoon. Then, I'm returning the whole batch unless Canon can come up with a fix. The camera takes absolutely fantastic photo and video images - so sad the battery issue exists.
05-12-2013 02:03 PM
Yes, there's a problem. No, Canon won't admit it or do anything about it. I just posted on another forum thread about this problem. After several tries by phone, email and the Canon web site, I was contacted by a 'contact center supervisor' who suggested I might've gotten a defective camera and there was no known problem as far as Canon was concerned. He wrote, "Such poor battery performance is not common. The several PowerShot SX280 HS cameras we have here in our office all perform within specifications." I responded with the links of several comments on YouTube, Amazon and elsewhere, and he never responded. The bottom line is that Canon either doesn't know or doesn't care that there's a probem - and suggests that we're all just making this up. I voted with my pocket and returned the camera for a full refund and purchased one by another manufacturer. Canon actually did me a favor.
05-13-2013 09:17 AM
A camera error was detected
Will shut down automatically
Restart camera E32
This happened independently of any particular function. One minute after turning the camera on and placing it on a table, the camera would shut down with the error message. I called Canon Customer Service. They asked me how long I had had the camera. When I said one day, the CS rep recommended returning the camera to the vendor for a refund. Now I have another Canon camera with issues right out of the box. Where does quality control happen at Canon? At the consumer level? If so, where is my paycheck?
05-13-2013 04:31 PM
I've been a Canon user for years and decided to replace my S5 IS. Based on the spec's and the reviews, I was about to buy the SX280 today but then I ran across these posts on the battery life. The main thing I do with the S5 is shoot video of my daughter's volleyball and basketball games and unless this battery issue is resolved I don't feel comfortable buying the SX280. I guess I'll have to go back to comparing the spec's of its competitors.
Wake up Canon!
05-13-2013 07:17 PM
@videophan wrote:I received my SX280 on 5/11 and had this low battery level problem after recording about two minutes of video. I have drained and recharged the battery but that did not correct the problem. I have fully charged the battery, removed the memory card, replaced the battery and hit the on/off button twice in rapid succession. This improved the problem but only marginally. It is very distracting having this low battery indicator flashing while trying to use the camera. You can turn the camera on and off to solve the problem if you are taking still photos but there is no workaround if you are taking videos of any significant length.Five months ago I ordered the predecessor to this camera, the SX260. As soon as I placed the charged battery and a memory card in the camera and turned the camera on, it shut down in 60 seconds with the error:A camera error was detected
Will shut down automatically
Restart camera E32
This happened independently of any particular function. One minute after turning the camera on and placing it on a table, the camera would shut down with the error message. I called Canon Customer Service. They asked me how long I had had the camera. When I said one day, the CS rep recommended returning the camera to the vendor for a refund. Now I have another Canon camera with issues right out of the box. Where does quality control happen at Canon? At the consumer level? If so, where is my paycheck?
Update: I sent several emails to CS at Canon. The first response was a request to return the camera for repair. I responded asking if Canon would pay for shipping both ways for repair. The first response was no, that is not the warranty policy. I checked and the charge for UPS ground shipping insured to purchase cost is $15.50 plus their charge for return shipping. I responded that the camera was now 3 days old and malfunctioned out of the box. I requested that my issue be escalated to a supervisor. While waiting for a response, I called Canon technical support and spoke to someone who seemed knowledgeable. He claimed he tested an SX280 while I was on the line and did not observe the issue at his end. I asked him if it could possibly be the battery and his response was "not likely." I explained the offer from the email at CS to send the camera back in at my expense for service and my hesitancy due to shipping cost both ways for a new camera. He said he understood but made no offer to pay for shipping. I checked my email after the call and was offered "as a one time courtesy only" prepaid shipping for repair,
My inclincation now is to return the camera to the vendor for a credit. Maybe this is now the standard way that defective products are dealt with. I suppose if I had bought the camera from a local store, that is what I would have done, but I didn't and instead bought the camera from a reputable internet vendor. You would think, however, that Canon would show some interest in satisfying the customer and not leave customer satisfaction to their product vendors.
05-14-2013 01:42 PM
I have the same issue.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.