09-28-2024 01:43 PM
Hello, I just bought a Canon PowerShot SX110 IS from an antique mall, it works just fine but says it’s having a memory card error even though I just bought a brand new memory card for it. I tried to format it but it just went to a black screen and said “Memory Card Error.” Any help would be appreciated!
09-28-2024 02:17 PM - edited 09-28-2024 02:22 PM
Hi and welcome to the forum:
Your cheapest solution is that there is an issue with the memory card.
First check that the write-protect switch on the side of the card is not set to protect: make sure the little lug is UP.
What kind of card did you get - i.e. is it a full-size card or a micro-SD with adapter, what brand and where did you source it?
09-28-2024 02:53 PM
Hi Trevor, thank you for the reply. I checked the card and it is not in the locked position. It is a SanDisk Ultra PLUS 64GB normal SD card just like the one you posted above.
09-28-2024 03:24 PM
I believe I found the issue, the camera can only take up to 32 GB with an SD card, so I just have to buy a smaller one. Thank you for your help anyways and I will update once I see if a new SD card works.
09-28-2024 03:41 PM
That would do it! I hope the smaller card works for you.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.