cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

I have a problem on my SX530 HS with a white dot.

JOLAVO777
Apprentice

This fixed white point is quite noticeable in dark videos, I noticed that this camera does not have the sensor cleaning mode, in mobile videos the white point moves in the video, in still videos it does not move. so if anyone can help me solve this problem i would be very grateful.

1 REPLY 1

NatalyaP
Product Expert
Product Expert

Greetings JOLAVO777,

The PowerShot SX530 HS camera may be experiencing a stuck pixel on its sensor. The stuck white pixel may move around a little bit when shooting video due to the internal image stabilization. Our suggestion is to send your PowerShot SX530 HS camera to our facility for service.

Canon U.S.A., Inc. has created a new online repair portal that allows you to set up service in a few simple steps. The repair portal gives you the ability to set up service for multiple pieces of equipment at once, and to receive a repair estimate in the majority of cases, depending on your model and issue. The portal also allows you to upload images or videos that will assist us in repairing your product. You can also select how you wish to be notified of the progress of your repair. The portal's service history section allows you to view all services that have been performed on any of your camera or video products since January 7, 2020.

Please follow the link below to access our online repair portal to arrange for service:

https://mycanon.usa.canon.com/signin

Instructions for Accessing and Using the Online Repair Portal.

You will need to access or create your My Canon Account.

If you already have a My Canon Account and your product is already registered, simply click on the “Get Repair Services” link on the left menu and follow the onscreen instructions to arrange for service for your product.

If you have a My Canon Account and your product is not registered, you must register your product first. Click on the “Get Repair Services” link on the left menu, then click on the “Register Product” link on the right. After your product is registered, click on the “Get Repair Service” link on the left menu and follow the onscreen instructions to arrange for service for your product.

If you do not have a My Canon Account, you will need to create one. After you create your account, click on the “Add Product” link to register your first product. After your product is registered, click on the “Get Repair Service” link on the left menu and follow the onscreen instructions to arrange for service for your product.

Once you have completed the repair request, you will have an opportunity to print a copy of the request for your records. This request form will also contain shipping instructions and an address label that you will attach to the outside of your shipping box when mailing your equipment for repair.

Avatar
click here to view the press release
Announcements