08-03-2013 11:42 PM
How do I get the camera A1400 to go to "Flash On". i.e so it will flash in daylight. Some call it " flash fill" other call it "forced flash" The manual refers to this mode, but I can't get it to work. It only gives me :Auto" or "Off" not "On" This is very useful in sunlight to fill in your subject. How do I set the camera to keep the flash ON> BG
08-05-2013 10:36 PM
By setting the shooting mode to "P" for program. That will give you the option you want.
08-06-2013 09:37 AM
Thank you- Finally realized that. For some reason others did know if this could be done. BG
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.