04-27-2014 03:04 PM
I can't connect, via USB, my silver PowerShot A2500 cam to my PC, Win 8.1 during "set-up". The computer simply doen't "recognize" the device, even after downloaded software from Canon is initiated.
04-29-2014 12:45 PM
Hi gemofashop!
When connecting your camera to your computer, please ensure the following:
Do you see any indication at all on the computer that the camera is connected?
Are there any other devices connected to your computer other than the camera, such as a printer or external drive?
If this is a time sensitive-matter, additional support options are available at Contact Us.
05-01-2014 11:27 AM
Yes, There's a printer connected alo.....
05-02-2014 04:27 PM
Hello gemofashop,
Since a printer is connected, I would recommend disconnecting it. Then reboot the system. If you are using a USB hub, try to connect the camera directly to the tower. The camera should give you an indication when a connection has been made. Is this the case when you connect your PowerShot?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.