05-26-2023 10:50 AM
The external pop up works, the settings are in M and I am able to select force flash, but when I hold down on the camera the flash charges but does not fire. The flash had no problem working before and I have only started having this problem a week or two ago.
05-30-2023 05:00 PM
Hello qwertypoop,
It doesn't sound to be a settings issue, but I would recommend starting with resetting the camera to defaults. This item is found in the yellow wrench menu #4 listed as Reset All. If the flash still does not fire in Manual mode with fill/force flash enabled, then the camera would need to be sent to our factory service center. Ship your camera to either of the addresses listed below depending on which is closest to you:
Canon Factory Service Center
123 Paularino Avenue
Costa Mesa, CA 92626
or
Canon Factory Service Center
12022 Canon Blvd.
Newport News, VA 23606
02-02-2024 07:27 PM - edited 02-02-2024 07:27 PM
Did you ever fix it? If so, how? Im having this same problem 😞
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.