09-19-2016 09:53 PM
I have a Canon Power Shot SX50. Why can I only take one photograph then shut it off before taking another photo
09-19-2016 11:10 PM
Most likely it is your battery if you are lucky. Even though a battery might show its charged when they fail they drain instantly in some cases, like in one shot. I'd try a new battery and if you have already then it might need service.or the charger itself is faulty I have the SX50HS also
A new battery and charger it cheap compared to sending it in for service and worse case you'll have a spare battery and charger.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.