09-22-2018 05:39 PM
Hello. I have a problem connecting my Canon G7X MarkII to my computer under windows 10.
I have downloaded Canon software and launched "Wireless Camera Connection Settings" on my PC. This software done some changes and I can see my PC on my camera screen.
But camera are trying to connect and after long time of attemting camera show "Connection failed".
I need support.
Screenshots of camera screen are attached.
Solved! Go to Solution.
09-23-2018 07:46 AM
Are you following any directions? There are step by step, how to videos on the camera’s product support page.
You should be connecting to the same LAN that your PC is connected to, not directly to the PC. There are also a couple of steps you need to perform on your PC, too.
09-23-2018 07:46 AM
Are you following any directions? There are step by step, how to videos on the camera’s product support page.
You should be connecting to the same LAN that your PC is connected to, not directly to the PC. There are also a couple of steps you need to perform on your PC, too.
09-23-2018 08:22 AM
Thank you very much! Helpful video. I didn't press add device when I was trying to connect camera to PC.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.