06-01-2024 02:44 AM - edited 06-02-2024 08:29 AM
I've got an old Canon A630, battery terminals are damaged but I can power it via DC-IN connected to an outlet. I'm looking to turn it into a portable rig, could I use a powerbank and a USB-C to DC-IN cable to supply power https://tutuapp.uno/ ?
The recommended Canon ACK-600 adapter is 4.3V, 1.5A. I've got a powerbank rated 5V, 2.4A. Would this work?
06-01-2024 12:36 PM - edited 06-01-2024 12:37 PM
It can't hurt to try it. The voltage difference isn't significant. Make sure the polarity is right on the DC-in plug.
And if you blow it up, no great loss.
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.