05-24-2024 07:36 AM - last edited on 05-24-2024 08:47 AM by Danny
We have the Imageclass MF6444cdw and need to replace the transfer film due to excess red toner ink spilling onto it. Has anyone done this and where can we obtain the instructions?
05-24-2024 09:11 AM
I believe that ITBs can be replaced. Canon Customer Support should be able to assist.
05-24-2024 10:21 AM - edited 05-24-2024 10:23 AM
Greetings,
I'd start with a cleaning
The ITB is not considered a user serviceable part. This is why documentation is hard to come by. Probably best left to a repair technician.
I found some youtube videos and this which is for the MF640 series.
I'd still recommend professional service.
The MF644Cdw has a 3yr warranty.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
05-29-2024 06:27 PM - edited 05-29-2024 06:28 PM
The thing about servicing an imageCLASS is that the cost of the parts plus labor could, conceivably, push the total into the ballpark of a brand-new unit. 😐
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.