02-03-2023 01:07 PM - last edited on 02-03-2023 01:25 PM by Arthur
Hello, i had to upgrade my computer from an old windows, to the current Windows 10 x64bit operating system. I am trying to setup a custom page for a Canon imageclass MF642cdw printer. the current driver says it is the most current. but will not let me setup a custom page in printer settings. i have gone through all the options and there is no area where i can add a "custom page" as shown in any documentation. Please help. have downloaded the drivers from the canon webpage Canon Support for Color imageCLASS MF642Cdw | Canon U.S.A., Inc.
02-27-2023 07:56 PM
The images above look like the generic Windows driver connection for the printer. It will give you some basic print options, but it will not give you full control of the printer. To get the proper driver settings that include the options for customer paper sizes. You can can try downloading and installing the recommended MF642Cdw MFDrivers from our support site using the link HERE.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.