12-29-2024 04:57 PM - last edited on 12-31-2024 10:17 AM by Danny
I recently replaced all 4 toners in my Canon MF634CDW color laser printer. Now there are black dots along the left side of prints. The dots are equally spaced 2.5 inches from the left side of the paper and there is a black dot approximately every one inch from the top to the bottom of the paper. I printed a blank MS Word document and the black dots still appear on the print out. Is this a toner issue? Or is there a roller inside the machine that I need to clean? If it is a toner issue, is it necessarily the black toner that is causing the issue? I don't want to re-buy all 4 toners. I already did the Clean Fixing Assembly and Clean ITB functions in the Maintenance menu multiple times.
01-02-2025 12:02 AM
Sounds like a drum defect, most likely the black toner. Each toner cartridge has its own drum. If you still have the old black cartridge, put it in, and see if you have the same problem. If so, the cartridges have warranties. Might be time to call Canon to replace the cartridge.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.