01-20-2024
10:08 AM
- last edited on
01-20-2024
10:13 AM
by
Danny
I have a mf249dw with a piece of paper stuck underneath the toner cartridge that I can see but it's too small to grab. How can I disassemble the printer to get to it?
Solved! Go to Solution.
01-20-2024 10:36 AM
I fixed it. On Reddit someone suggested pushing a piece of cardboard through the feed channel. I used a piece of card stock. Couldn't get it through from the feed side, so I pushed it gently the other direction down from under the toner cartridge. After a couple of tries, by pulling the card stock back out slowly it brought the torn paper out with it far enough for me to grab it.
01-20-2024 10:36 AM
I fixed it. On Reddit someone suggested pushing a piece of cardboard through the feed channel. I used a piece of card stock. Couldn't get it through from the feed side, so I pushed it gently the other direction down from under the toner cartridge. After a couple of tries, by pulling the card stock back out slowly it brought the torn paper out with it far enough for me to grab it.
05/13/2026: New firmware updates are available.
EOS R5 Mark II - Version 1.3.0
EOS R6 Mark II - Version 1.7.0
03/17/2026: New firmware updates are available.
SELPHY CP1500 - Version 1.0.7.0
01/20/2026: New firmware updates are available.
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.