07-09-2020 10:55 PM
Hello All,
I just received a MF733Cdw today and installed tonight. I was going through the color setup which printed a color bar sheet which I was supposed to scan on hte glass bed. I placed the sheet on the bed and continued. The motors engaged then stopped and the screen had an error E202-0002 and tols me to recycle power.
This did not resolve the problem and it happens if I copy or scan. I have seen next to nothing on this error. Please advise. John
07-13-2020 04:12 PM
Hi JMAallen.
For the error E202-0002 on a fresh new setup, first, check that all packaging has been removed from the printer. If all packaging has been removed and the error persists, then the unit will require service.
If you're located within the U.S., you may contact our phone-based support at Our support is available at 1-800-OK-CANON (1-800-652-2666) Monday-Friday from 10:00 am to 6:30 pm ET, excluding holidays.
If you're located outside of the U.S., you may find your local branch of Canon at http://global.canon/en/support
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.