cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Imageclass MF641Cw Change Margins/Printing on Kraft Bags

Kingdom_8pirit
Apprentice

Hey Community,

I am looking to print on some Kraft bags. The size of the bag is 4 x 6 inches, I would only need to print on 3.5 x 4.5 inches of the bag. Is it possible for me to change the margins to print to that size and would the printer pick up the bag and send it through. Printer details below:

Laser Printer, Color Imageclass MF641Cw

Thanks for your help. 

Matthias

1 REPLY 1

Hector
Product Expert
Product Expert

Hello,

You can try using the 4X6 paper setting on the printer and feeding the kraft bag from the multipurpose tray, but I can't guarantee that it will work since kraft bags are not a supported media type for this printer. When printing on the kraft bag, you can use your programs margin settings to adjust your print. The program you are printing from will determine the margin settings. In this situation, I would suggest contacting support at 1-800-652-2666. Our agents would be able to assist and can check what margin settings are available from the specific operating system on your computer.

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!