03-19-2015 07:25 AM - edited 03-19-2015 07:26 AM
I want to print A5R from Drawer 1. If I load the A5R paper into the drawer and then print, the first page will print, but an error message flashes up: Check Paper Size.
I then change the Drawer 1 Paper Size to A5R, and re-print. I receive another error, without anything printing: Set below paper. (1)A4. Plain
The problem I believe is being caused by the software I am printing on telling the printer that it is sending A4. This is unfortunately a quirk of the software. Is there anyway I can make the printer ignore what paper size it thinks is being sent, and to just printer on A5R without stopping? Many thanks
Printer: Canon i-sensys LBP6780X
03-19-2015 08:51 AM
I've changed Paper Size to Mixed, and it now prints, but very slow at 10 seconds per sheet
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.