05-15-2015 09:24 AM
We have a MF8580cdw printer, and came in this morning to find the red error code blinking - it says cannot print rx data. How do I fix this?
05-20-2015 09:48 PM
Hi EISSOLAR.
I will be able to assist you.
This error appears when the machine attempts to receive a fax when the toner is low. You will need to enable the "Continue Printing When Toner is Low" function. Please follow the instructions below to perform this operation.
1. Press [Menu].
2. Scroll to [Fax Settings], and then press [OK].
3. Scroll to [RX Print Settings], and then press [OK].
4. Scroll to [Con't Printing When Toner is Low], and then press [OK].
5. Highlight [On], and then press [OK].
Once the function is enabled, you will be able to receive faxes.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
11-21-2016 01:25 AM
Connot print RX data errer.Conon MF8580cdw
04-17-2018 05:10 PM
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.