cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon ImageRunner 2202N

Rub20
Apprentice

Hi there, i hope you are doing fine, i have a canon ImageRunner 2202N at my work, when i search available printers on the network it appears, but when i add it, it does not print at all, but its working on those computers add on few months ago, i have tried to download new drivers but still does not work. also when it comes to print both sides, it only shows Manually both sides. 

 

can anyone help me please.

 

Thanks

 

Rub

1 ACCEPTED SOLUTION

KDef
Enthusiast
If the printer allows automatic duplexing but is only showing manual on the print screen, odds are good it was installed with a different driver. If you've installed the driver correctly, make sure you remove the printer then readd it. Hopefully that'll get it using the proper driver.

Beyond that guess, what do you mean it does not print? Does the print job go into the print queue? Does it show an error there? Does it disappear from the queue or just sit there doing something?

View solution in original post

4 REPLIES 4

Tiffany
Moderator
Moderator

Hi Rub20,


Thanks for posting! While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area.


If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.

Thank you!

Thank you for your answer Tiffany

KDef
Enthusiast
If the printer allows automatic duplexing but is only showing manual on the print screen, odds are good it was installed with a different driver. If you've installed the driver correctly, make sure you remove the printer then readd it. Hopefully that'll get it using the proper driver.

Beyond that guess, what do you mean it does not print? Does the print job go into the print queue? Does it show an error there? Does it disappear from the queue or just sit there doing something?

Thank you very much for your reply, i am going to give it a try.

 

about not printing, when i print it does not even show anything, it shows that it works, and the document does not come out.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.