02-06-2023 07:36 AM
Hello,
00I have a Brother printer with similar functionality to my new imageClass MF743CDW. The Brother’s color are printing much bolder than the Canon. The Canon’s color look as if they are faded.
I am on a Mac using Ventura. I am printing with Canon Color Settings vs ColorSync. Under the Quality settings I am printing at 600 dpi. There are other Quality settings but I am not sure what to do with them.
Could someone suggest what I should try to get a better quality color print?
Thanks.
02-28-2023 03:08 PM
Hello Nvw,
You can adjust the color setting for the printer using the printer drop down for quality in the Mac's print window. You will be able to adjust the brightness, contrast and the hue. You can adjust the color setting in the driver using the steps in the link HERE. You can also try adjusting the color gradation from the operation panel to see if it improves the print quality.
03-02-2023 07:30 AM
Thank you Hector, I will give this a try.
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
EOS R6 Mark II - Version 1.2.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.