cancel
Showing results for 
Search instead for 
Did you mean: 

2 Sided Printing

rbaroncpd
Contributor

I have a Cnon MFC733 Color Laser Printer that for some reason will not give me the option to print 2 sided.

 

I have searched, reinstalled drivers, looked in the manual but can seem to figure this problem out.

 

I'm hopeing someone has had this problem and solved it.

 

Thanks in advance.....

1 ACCEPTED SOLUTION

I have since downloaded the latest driver for my printer and it is now able to print on both sides of the paper.

 

Thanks for the help. I appreciate it.

View solution in original post

2 REPLIES 2

MysteryWriter
Contributor

This issue was mentioned in a post dated October 16. The solution was to find an older version of the scan utility. Can some provide a link to this older version? Perhaps Canon should issue a updated version?

I have since downloaded the latest driver for my printer and it is now able to print on both sides of the paper.

 

Thanks for the help. I appreciate it.

Announcements
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM