cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

my canon selphy cp800 driver will not install on my windows 10 laptop.....

Maddy47
Apprentice

Does anyone know how to solve my problem?

1 ACCEPTED SOLUTION

sp2001
Apprentice

Hi, I've resolved donwloading the windows 7 64bit version and then I've selected the downloaded file ( cp800w764.exe ) and selected "Troubleshoot compatibility" and then I've selected "Troubleshoot program". The system then ask with a series of checkbox "What problem do you notice?" and I've selected the first option "The program worked in earlier version of Windows but won't install or run now".

Then press next

Then I've selected Windows 7 from the list

Then pressed next

Then on following windows I've press "Test the program..." button, the installation started and I was able to do the full installation of the driver. Don't know if it needed or not but before doing this procedure I had already connected the CP800 to an usb port and switch it on. 

After the installation of the windows 7 64bit driver under "Devices and printers" I see it as a normal printer and was able to print normally on it. 

 

hope this help

 

best regards

 

S

View solution in original post

8 REPLIES 8

jrhoffman75
Legend

I don't believe it's compatible. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

sp2001
Apprentice

Hi, I've resolved donwloading the windows 7 64bit version and then I've selected the downloaded file ( cp800w764.exe ) and selected "Troubleshoot compatibility" and then I've selected "Troubleshoot program". The system then ask with a series of checkbox "What problem do you notice?" and I've selected the first option "The program worked in earlier version of Windows but won't install or run now".

Then press next

Then I've selected Windows 7 from the list

Then pressed next

Then on following windows I've press "Test the program..." button, the installation started and I was able to do the full installation of the driver. Don't know if it needed or not but before doing this procedure I had already connected the CP800 to an usb port and switch it on. 

After the installation of the windows 7 64bit driver under "Devices and printers" I see it as a normal printer and was able to print normally on it. 

 

hope this help

 

best regards

 

S

That worked!!!  Thanks!

where is "Troubleshoot compatibility"?

Right click on the install exe file and you will see the drop down menu with the "Troubleshoot compatibility" listed.

Thank you! It worked perfectly.

You're **bleep**ing genius, Man!

Thank you!

I've found your post for a miracle...Canon must be ashamed about this. I think it would need some second to make the driver for win 10 and put in the list of drivers...but for sure, business is business, so better try to sell new hardware than make useful the older...put your selphy cp 800 in the trash while we will make spots about how to save the planet and the environment...

You made my life ! oh God! I was so desperate , thinking to buy a newer version of this printer!

Thank you so much!

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!