02-01-2023 07:13 PM
I started setting up my Selphy CP1500 but accidentally hit the down arrow as I was pressing OK to set the display language to English. It is now some other language that I don't understand. How do you change the display language, or how do you force a reset? I have googled & searched & cannot find an answer.
Solved! Go to Solution.
02-02-2023 08:53 AM
I thought I posted this reply, but don't see it so trying again.
I managed to fumble through it. The menu came up this morning, in whatever language, & I could see that one was tools, so selected that, & through the various other screens was able to find one for setup. It took me back to the language selection.
02-02-2023 08:53 AM
I thought I posted this reply, but don't see it so trying again.
I managed to fumble through it. The menu came up this morning, in whatever language, & I could see that one was tools, so selected that, & through the various other screens was able to find one for setup. It took me back to the language selection.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.