02-09-2022 12:56 AM
My IP100 printer sat idle for a long time. But I put in new ink cartridges and it was printing just fine. But someone suggested that I also replace the print head, so I ordered a new one, put it in, and got an Error B200. Took the new print head out and put the old head back in, but I can't get back to where I was at least printing because of this B200 error. I have cleaned the original print head but can't seem to do anything to get beyond the error. What can I do?
02-09-2022 05:40 AM
This might help:
Common Printer Problem: Canon Printer Error B200 – Smart Print Supplies
02-10-2022 05:12 PM
Thank you very much, John. I had my old printhead installed from years ago and the black was printing but not the color. I currently didn't need color so life was just fine only printing black. But I followed the advice to get a new print head and installed it and got the B200 error with the new head. I continue to get that error having removed the new printhead and re-installed the old one. Does the printer need to be reset to factory defaults? I am just trying to get back to being able to print in B & W with the old printhead for now. Also is there any option out there for paid tech support?
02-10-2022 06:51 PM
I don't know the answer to those questions. I do see various for-pay support sites pop up but I don't know anything about them.
The printer may have reached the end of its service life. Maybe one of the moderators will see this and have some advice.
02-10-2022 07:01 PM
03/02/2023: New Firmware Updates Are Available:EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.