07-11-2022 08:43 PM
My Selphy Qx10 is printing a vertical line/scratch on every print about 2-3mm in from the left edge in the active/printed area. Usually this would mean a print head clean is needed but I have no idea how to do that with this printer and google isn't proving helpful. I'm very careful when loading the paper and "ink". This is super frustrating given the relative price per print.
Any suggestions on resolution?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.