cancel
Showing results for 
Search instead for 
Did you mean: 

Zebra Z4M PLUS Error Condition Paper Out!

Taner
Apprentice
Hello, I am in trouble with this Zebra printer Z4M PLUS and error condition is Paper Out!
I tried everything in technical documentation about Z4M PLUS and nothing!
In technical documentation I read things like these:
ERROR CONDITION PAPER OUT:
Media is not loaded or is loaded incorrectly ! Load media correctly and see Media Loading Overview on page 28! (I loaded everything correctly!)
Misaligend media sensor! Check positon of the media sensor! (I check the position and I tried every one possible position of the media sensor but nothing!)
The printer stops: MEDIA light ON, ERROR light flashes!
The printer is set for noncontinuous media, but continuous media is loaded! Install proper media type, or reset printer for current media type and perform calibration! (Okay I did it and nothing!)
 
 
2 REPLIES 2

Crista
Whiz

Hi Taner! 

Thanks for joining and posting the Canon Forums! 

The printer you have is manufactured by Zebra and not Canon. We'd suggest reaching out to Zebra for further assistance with the media issue you are experiencing.  

 

We hope this helps point you in the right direction!

The right direction is not exist.
Zebra works only with  their partners and discriminate ex partner or users. Access is not granted to zebra support forum!
But thank you!.

Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM