02-03-2019 03:01 AM
Hello! I have just bought a new scanner Lido 120 and after installing it, I have been unable able to find out how to turn it on from the manual. So I have uninstalled it, and am going to reinstall it, to see if I missed some information the first time.
But what I need to know now please is; if I uninstall the driver, will I be able to reinstall it from the installation disk?
(I wasn't able to do this from an older scanner that I had)
I have windows 7 and OS 11
I would be very grateful of any help thanks.
Solved! Go to Solution.
02-03-2019 04:01 PM - edited 02-03-2019 04:03 PM
I don't understand why it wouldn't be able to be installed from the disk, but here is the link to the driver you can downlaod from the support page.
02-04-2019 04:14 AM
02-03-2019 04:01 PM - edited 02-03-2019 04:03 PM
I don't understand why it wouldn't be able to be installed from the disk, but here is the link to the driver you can downlaod from the support page.
02-04-2019 04:14 AM
Thank you very much!! It is now installed aand set up and working.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.