Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posting section


I have a question I would love to post. The only tab that has a "NEW MESSAGE" button is "GENERAL DISCUSSION". I have read the replies from the other people having similar problems but the directions were inaccurate. Am I completely intellectually incompetent or is there some thing wrong with the site?


thanks for the link, I tried to get there thru the page, but,.. I'll save the link.


@aflamingo wrote:

Thanks, but the link you gave me takes me to essentially the same page I was on.  About, camera, printer cinema eos etc  [links removed per forum guidelines]

and no way to post a new message.

Clincking on the printer, i see the provate message button but I'm prettly sure that won't help. 

Here's my problem my iX 6820 has suddenly started spitting errors, B200 and now 1403.  And I have deadlines.



attempt going to the main forum web page, observed at [link corrected] and you may see a listing of categories like "EOS," "EOS rebellion," 'personal Printers," "office Printers," and so on. after you click on on one of these boards you may see a red "New Message" field inside the top-left corner to allow you to submit. in case you preserve to run into any issue, let us recognize which product you have got which you wish to submit a message about and we're going to link you at once to that particular forum to post.


we hope this helps and sit up for your contributions!



I have been struggling to find how to post new message. Read all the prior messages on how to but still do not find the New message button.


Why is it so difficult?


Big shot

Hi, Big shot!


To start a new thread, start HERE, click on the board the best pertains to the product you're posting about, and then click the "NEW MESSAGE" button at the upper left.


Hope this helps!

I am trying to get information on photos taken with a sx620 hs.  Can I reverse the special effects on a photo already taken.? Also what did I do to make movies that replace fast with no sound??

I also interested in this moment, I will be grateful to any advice.


At first i was also confuse with the posting section, but now I learend to navigate it ans was able to repy successfully ti the posts.


I am trying to scan an odt document from my printer (ts6050) to my laptop but it ALWAYS ends up as a bmp file which is no good as I want to edit the document (Docx or odt) Any info gratefully received! 


I ws shooting the eclipse onthe 21st and many of my photos did not save while others did. I also had the message of Exp SIM and I have read that this indicates something about not bieng enough light. The image was clearly shown on my live view when I hit the shutter button but it did not save. The ones that did not save were the ones that were the largest and the brightest.


I was using a Tamron 18 - 400 mm lense on a 80 D body. 


I have Canon NG 6320 connected to Win7 Desktop PC via USB cable.

Now I added a second PC with Win 10.

I have a home Wi-Fi network both PCs are connected.

My questions: 

1. If I switch the printer to wireless mod, will I able to use the printer with both PCs?

2.What is a step-by-step procedure to switch the printer to wireless mode, register it on home network and on PCs?


03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

03/28/2023: New firmware version is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.