cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posting section

Drbrown
Contributor

I have a question I would love to post. The only tab that has a "NEW MESSAGE" button is "GENERAL DISCUSSION". I have read the replies from the other people having similar problems but the directions were inaccurate. Am I completely intellectually incompetent or is there some thing wrong with the site?

22 REPLIES 22

thanks for the link, I tried to get there thru the page, but,.. I'll save the link.

 


@aflamingo wrote:

Thanks, but the link you gave me takes me to essentially the same page I was on.  About, camera, printer cinema eos etc  [links removed per forum guidelines]

and no way to post a new message.

Clincking on the printer, i see the provate message button but I'm prettly sure that won't help. 

Here's my problem my iX 6820 has suddenly started spitting errors, B200 and now 1403.  And I have deadlines.

Thanks

 


attempt going to the main forum web page, observed at https://community.usa.canon.com/ [link corrected] and you may see a listing of categories like "EOS," "EOS rebellion," 'personal Printers," "office Printers," and so on. after you click on on one of these boards you may see a red "New Message" field inside the top-left corner to allow you to submit. in case you preserve to run into any issue, let us recognize which product you have got which you wish to submit a message about and we're going to link you at once to that particular forum to post.

 

we hope this helps and sit up for your contributions!

Hello,

 

I have been struggling to find how to post new message. Read all the prior messages on how to but still do not find the New message button.

 

Why is it so difficult?

 

Big shot

Hi, Big shot!

 

To start a new thread, start HERE, click on the board the best pertains to the product you're posting about, and then click the "NEW MESSAGE" button at the upper left.

 

Hope this helps!

I am trying to get information on photos taken with a sx620 hs.  Can I reverse the special effects on a photo already taken.? Also what did I do to make movies that replace fast with no sound??

I also interested in this moment, I will be grateful to any advice.

vander
Contributor

At first i was also confuse with the posting section, but now I learend to navigate it ans was able to repy successfully ti the posts.

woody75
Apprentice

I am trying to scan an odt document from my printer (ts6050) to my laptop but it ALWAYS ends up as a bmp file which is no good as I want to edit the document (Docx or odt) Any info gratefully received! 

Rasklein
Apprentice

I ws shooting the eclipse onthe 21st and many of my photos did not save while others did. I also had the message of Exp SIM and I have read that this indicates something about not bieng enough light. The image was clearly shown on my live view when I hit the shutter button but it did not save. The ones that did not save were the ones that were the largest and the brightest.

 

I was using a Tamron 18 - 400 mm lense on a 80 D body. 

geoyar
Apprentice

I have Canon NG 6320 connected to Win7 Desktop PC via USB cable.

Now I added a second PC with Win 10.

I have a home Wi-Fi network both PCs are connected.

My questions: 

1. If I switch the printer to wireless mod, will I able to use the printer with both PCs?

2.What is a step-by-step procedure to switch the printer to wireless mode, register it on home network and on PCs?

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!